ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Temperature Blend Door Actuator|Page 7338 > < Temperature Blend Door Actuator|Page 7336
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Vacuum Control Motor

Panel Defrost Door

REMOVAL

1. Disconnect the battery ground cable.

2. Remove the lower steering column opening finish panel.

1

Remove the screws. Detach the hood release handle.

2

Remove the two screws.

3

Pull out to release the retaining clips. Remove the lower steering column opening finish panel.

3. Remove the bolts and the lower steering column opening finish panel reinforcement.

4. Remove the two screws. Detach the relay panel.

Temperature Blend Door Actuator|Page 7338 > < Temperature Blend Door Actuator|Page 7336