Ranger 4WD L4-2.3L VIN D (2002)
3. Rotate the vacuum control motor, disengage the lever, and remove the vacuum control motor.
CAUTION: Do not attempt to bend any part of the lever. It is brittle and will break.
INSTALLATION
1. To install, reverse the removal procedure.
Panel/Floor Door
REMOVAL
1. Remove the lower steering column opening finish panel.
1
Remove the screws, detach the hood release handle.
2
Remove the two screws.
3
Pull out to release the retaining clips. Remove the lower steering column opening finish panel.
2. Remove the bolts and the lower steering column opening finish panel reinforcement.