Ranger 4WD L4-2.3L VIN D (2002)
2. Install the A/C compressor clutch field coil.
1
Place the A/C compressor clutch field coil on the A/C compressor with the A/C compressor clutch field coil electrical connector correctly
positioned.
2
Place the special tool on the A/C clutch field coil.
3
Place the special tool on the special tool.
4
Use the special tool to install the A/C compressor clutch field coil until bottomed completely against the A/C compressor.
CAUTION: Do not use air tools. The A/C compressor clutch field coil can be easily damaged.
3. Install the A/C clutch pulley.
NOTE: The A/C clutch pulley is a tight fit on the A/C compressor head; it must be correctly aligned during installation.
4. Install the A/C clutch pulley snap ring with the bevel side out.
5. Place one nominal thickness A/C clutch hub spacer inside the clutch hub spline opening.