Ranger 4WD L4-2.3L VIN D (2002)
Control Assembly: Description and Operation
The climate control assembly has three system controls:
-
The A/C heater function selector switch combines a vacuum selector valve with two electrical switches to supply battery positive voltage (B+) to
the A/C clutch circuit and the blower motor control circuit.
-
The temperature selection is accomplished with a cable controlled blend door actuator that controls positioning of the temperature blend door.
Movement of the control knob from COOL (Blue) to WARM (Red) causes a corresponding movement on the air temperature control door and
determines the temperature that the system will maintain.
-
The blower motor switch controls blower motor speed by adding or bypassing resistors in the heater blower motor switch resistor.
