Ranger 4WD L4-2.3L VIN D (2002)
2. Install new O-ring seals on the evaporator core orifice.
-
Lubricate the O-ring seals with clean PAG oil or equivalent.
3. Position the evaporator core orifice into the special tool.
4. Using the special tool, install the evaporator core orifice.
5. Connect the condenser to evaporator line spring lock coupling to the evaporator inlet. Restore any components that were removed for access.
-
Install new O-ring seals lubricated with clean PAG oil or equivalent.
6. Evacuate, leak test, and charge the refrigerant system.