Ranger 4WD L4-2.3L VIN D (2002)
5. Remove and discard the transmission fluid filter.
1. Remove the transmission fluid filter screw.
2. Remove the transmission fluid filter.
6. Clean and inspect the transmission fluid pan and magnet. Clean all mating surfaces.
7. Flush the transmission fluid cooler and transmission fluid cooler lines.
Installation
1. CAUTION: Lubricate fluid filter O-rings with clean automatic transmission fluid or they may be damaged.
Lube and install new O-rings onto the transmission fluid filter. Install a new transmission fluid filter.
-
Position transmission fluid filter on the main control valve body.
2. CAUTION: Make sure wire harness is not pinched under filter.
Install transmission fluid filter screw.
