Ranger 4WD L4-2.3L VIN D (2002)
Positive Crankcase Ventilation Valve: Service and Repair
REMOVAL
1. Remove the LH front wheel and tire.
2. Remove the left side inner fender well splash shield.
1
Remove the screws.
2
Remove the pushpin.
3
Remove the bolts.
4
Remove the splash shield.
CAUTION: Remove the electrical connector locators from the splash shield prior to removal.
3. Disconnect the coolant bypass hose from the routing clip.
4. Gently pry the Positive Crankcase Ventilation (PCV) valve cap off the two tabs.