Ranger 4WD L4-2.3L VIN D (2002)
Throttle Cable/Linkage: Description and Operation
Component Location
The throttle is controlled by the accelerator cable which is attached to the accelerator pedal and shaft.
^
The accelerator pedal and shaft must travel smoothly from idle to the wide open throttle position. Hesitation on return or prevention of return to
the idle position must not occur.
^
Components such as wiring, hoses, sound insulation or carpet must not contact the sliding member of the accelerator cable or the accelerator pedal
and shaft.
^
The throttle assembly is not adjustable.