Ranger 4WD L4-2.3L VIN D (2002)
Transfer Case Actuator: Service and Repair
Transfer Case-Automatic Shift
Transfer Case Shift Motor
Removal and Installation
1. Raise and support the vehicle.
2. Disconnect the transfer case harness connector.
3. Remove the two bolts retaining the harness to the motor assembly and connector.
4. Remove the rear bolt.
5. Remove the remaining front bolt and the motor assembly and connector. Note the position of the triangular shaft extending out of the transfer case
cover.
6. CAUTION: Do not gouge or nick the aluminum surface.
Clean the mating surfaces of the motor and the transfer case cover.
