ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Safety Belt Buckle|Page 7916 > < Safety Belt Buckle|Page 7914
Page 7
background image

SENSORS.

THE SIDE AIR BAG SENSORS ARE LOCATED AT OR NEAR THE BASE OF THE B-PILLAR.

TO DEPLETE THE BACKUP POWER SUPPLY ENERGY, DISCONNECT THE BATTERY GROUND CABLE AND WAIT AT LEAST
ONE MINUTE. BE SURE TO DISCONNECT AUXILIARY BATTERIES AND POWER SUPPLIES (IF EQUIPPED).

12. Restore the vehicle to operating condition.

1

Reactivate the supplemental restraint system (SRS).  Refer to Air Bag(s) Arming and Disarming.

WARNING:  TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, NOTES,
AND INSTRUCTIONS IN THE SUPPLEMENTAL RESTRAINT SYSTEM DEACTIVATION/REACTIVATION PROCEDURE.
 
Refer to Air Bag(s) Arming and Disarming.

2

With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS).  See: Air Bag(s) Arming and
Disarming/Service and Repair/Prove Out Procedure

WARNING:  THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE
FROM THE VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE
VIOLATION OF VEHICLE SAFETY STANDARDS.

3

Check the active restraint system for correct operation.

Safety Belt Buckle|Page 7916 > < Safety Belt Buckle|Page 7914