Ranger 4WD L4-2.3L VIN D (2002)
4. Disconnect the Passenger Air Bag Deactivation (PAD) switch electrical connector.
5. Remove the passenger air bag deactivation (PAD) switch cover.
6. Remove the passenger air bag deactivation (PAD) switch.
1
Remove the retaining screws.
2
Remove the passenger air bag deactivation (PAD) switch.
INSTALLATION
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS AND
NOTES AT THE BEGINNING OF THE REMOVAL PROCEDURE.
1. Disconnect the battery ground cable and wait at least one minute.
2. Install the PAD switch.
