Ranger 4WD L4-2.3L VIN D (2002)
Front Steering Knuckle: Service and Repair
Wheel Knuckle
Special Tool(s)
Removal
1. Remove the wheel hub.
2. Remove the torsion bar.
3. CAUTION: Secure the front axle shaft to prevent it from overextending. Failure to do so can cause damage to the front axle shaft.
Suspend the front axle shaft with wire.
4. Remove the tie-rod end castellated nut.
1. Remove the cotter pin.
2. Remove the castellated nut.
