ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Steering Gear > < Ignition Switch Lock Cylinder|Page 7198
Page 2
background image

4. Remove the upper and lower steering column shrouds.

1. Remove the screws.
2. Remove the upper and lower steering column shrouds.

5. Remove the key release lever and spring.

1. Remove the key release lever bolt.
2. Remove the key release lever and spring.

Installation 

1. NOTE:  When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive

strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn its strategy.

To install reverse the removal procedure.

Steering Gear > < Ignition Switch Lock Cylinder|Page 7198