Ranger 4WD L4-2.3L VIN D (2002)
9. Remove the reservoir.
10. Remove the three pushpins, four bolts, four screws and the inner fender splash shield.
11. Unclip the hydraulic line-to-frame retainer.
12. CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, wash the surface with
water immediately.
Unlock and remove the clutch master cylinder assembly.
-
Twist the clutch master cylinder clockwise 45 degrees to unlock it from the support bracket.
13. Remove the reservoir, the hydraulic line and the clutch master cylinder as an assembly.
14. CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, wash the surface with
water immediately.
To install, reverse the removal procedure.
-
Bleed the clutch hydraulic system.
