Ranger 4WD L4-2.3L VIN D (2002)
8. Remove the differential gears.
1. Remove the two differential pinion gears.
2. Remove the two differential side gears.
3. Remove the two differential pinion thrust washers.
9. CAUTION: Keep the differential clutch packs in order. Do not mix them. They must be reassembled in the same sequence.
Remove the differential clutch packs and differential side gears and tag them "right" and "left" with the shim.
-
Clean and inspect the remaining parts of the differential case for wear or damage and install new parts as necessary.
10. CAUTION: Do not use acids or solvents when cleaning the differential clutch palm Wipe components with a clean, lint-free cloth only.
Clean and inspect the differential clutch packs for wear and install new parts as necessary.
Assembly
