Ranger 4WD L4-2.3L VIN D (2002)
1. CAUTION: 118 ml. (4 oz.) of the friction modifier must be used in the axle.
Lubricate each steel clutch plate and soak all the friction plates for no less than 15 minutes with friction modifier.
2. CAUTION: Do not mix the clutch plates, clutch discs or shim from one side with the other.
Assemble the differential clutch packs (without the shims) on their respective differential side gear.
3. CAUTION: Use the correct mandrel with the special tool.
Place the base portion of the special tool in a vise. Install the differential side gear and differential clutch pack (without the shim) on the tool.
