Ranger 4WD L4-2.3L VIN D (2002)
Seals and Gaskets: Service and Repair
Rear Drive Axle/Differential-Ford 7.5-Inch Ring Gear
Drive Pinion Seal
Special Tools
Special Tool(s)
Removal
1. Remove the pinion flange.
2. Pry up on the metal flange of the rear axle drive pinion seal. Install gripping pliers and strike with a hammer until the rear axle drive pinion seal is
removed.
Installation
1. Lubricate the new rear axle drive pinion seal with grease.
2. CAUTION: If the rear axle drive pinion seal becomes misaligned during installation, remove the rear axle drive pinion seal and install a new
seal.
Using the special tool, install the rear axle drive pinion seal.
3. Install the pinion flange.