Ranger 4WD V6-171 2.8L (1983)
Idle Speed: All Technical Service Bulletins
Carburetor - Engine Stalling On Deceleration
Article No. 84-24-15
STALLS - (2.8L) - DECEL STALLS
LIGHT TRUCKS 1983-84 RANGER/BRONCO II
Service for stalling on decel or when coasting to a stop.
To alleviate low idle speed and before attempting diagnosis, adjustment or service of the electronically controlled idle speed control, the carburetor
throttle stop screw must be set to the following specification. The electronic idle speed control relies on this screw position to maintain proper engine
RPM during some decel and low idle speed modes of operation.
750 RPM (Neutral) Manual Transmission 650 RPM (Drive) Automatic Transmission
Refer to the following Shop Manuals:
1984 Volume HT, Section 4, Page 25 1984 Volume H, Section 4, Page 79
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: 9500C
TIME:
0.4 Hr. DLR. CODING: Basic Part No. 9510 Code: 93