Ranger 4WD V6-171 2.8L (1983)
Figure 14
Assembly - Page 16-85-10
(Refer to Operation #15, Page 10). After the shift cam (7F063); shift lever/shaft (7B106); and snap ring (387949-S) have been assembled to the front
case assembly (7005) and with the shift lever/shaft (7B106) positioned into "4WH" detent, place the assist spring roller (7C191) into "part-position" on
the 90~ bent tang of the assist spring (7C349) (Figure 14, Views D and E) and insert the assist roller (7C191) into the assist spring/roller slot of the shift
cam (7F063 - New Design) (Figure 14, Views A and B). Position the middle section of the assist spring (7C349) into the groove of the front case (7005)
pivot boss (Figure 14, Views C and D) and push-to-lock the upper end of the assist spring (7C349) behind the front case spring anchor tab (Figure 14,
Views C and D).