Ranger 4WD V6-182 3.0L (1994)
8.
Disconnect ICM Connector C1006, Figure 9.
a.
Remove the wire from Pin B (Circuit # 11 T/Y) from the connector.
b.
Tape the wire back on the existing harness.
9.
Install the small square terminal of the RFI Suppression Audio Cable (F47Z-14A411-B) into the Circuit # 11 slot of Connector C1006, Figure 9.
a.
Ensure it is fully seated in the connector.
b.
Reinstall the connector on the ICM.
10.
Remove the front battery ground to the front radiator support nut, Figure 10.