Ranger 4WD V6-182 3.0L (1994)
____ Rear tires swapped side-to-side.
____ Front-to-rear tire swap.
2.
Alignment
____ Unlocked hubs check.
____ Toe changed to ____.
___
Caster changed and split is ____.
___
Camber changed and split is ____.
3.
Tire circumference
____ Unlocked hubs check.
___
Tire circumference checked and two (2) closest circumference tires swapped to rear axle.
4.
Steering gear valve
____ Unlocked hubs check.
____ Install pressure gauge.
____ Check fluid level with engine off and on.
___
Apply torque to the steering wheel nut and check gauge readings.
___
Replaced the shaft and control assembly.
____ Removed the pressure gauge.
5.
RABS linkage
____ Replaced the RBS linkage.
6.
Brake imbalance
____ Unlocked hubs check.
____ Front wheel rotational drag check.
____ Master cylinder check.
____ Piston retraction check.
____ Rotors and linings swapped from side-to-side.
____ Rear brakes checked.
___
Rear drums and shoes swapped from side-to-side.
7.
Miscellaneous
___
Check for loose, damaged or worn parts.
