Ranger 4WD V6-182 3.0L (1994)
NOTE: All 4 x 4 and 4.0L applications will use a studded bolt (M6 x 1.0). Tighten stud to 12-16 N-m (106-142 in-lb), screw to 9-12 N-m (80-106
in-lb).
CAUTION: Make sure the valve moves freely in the bore.
Install throttle valve, actuating rod, vacuum diaphragm and retaining clamp. Hold in position by tightening M6 x 12mm screw with a 10mm wrench.
