Ranger 4WD V6-183 3.0L (1993)
Fuel Line Coupler: Service and Repair
Spring Lock Coupler
REMOVAL
1. Relieve the fuel system pressure.
CAUTION: Do not use any sharp tool or screwdriver as it may damage the spring lock coupling.
Fuel Tube Clip
2. Remove the fuel tube clip from the spring lock coupling by hand.
3. Twist the fitting to free it from any adhesion at the O-ring seals.
4. Fit Disconnect Tool D87L-9280-A (3/8 inch) or D87L-9280-B (1/2 inch) or equivalent to the coupling.
Disconnect Tool
5. Close the tool and push it into the open side of the cage to expand the garter spring and release the female fitting.