Ranger 4WD V6-183 3.0L (1993)
Air Cleaner Element: Service and Repair
Air Intake System
REMOVAL
1. Loosen outlet tube clamps from air cleaner cover and throttle body. Remove the outlet tube.
2. Disconnect the vacuum tubes to bi-metallic sensor in the air cleaner cover.
3. Disconnect the Mass Air Flow (MAF) sensor electrical connection.
4. Disconnect the Intake Air Temperature (IAT) sensor electrical connector.
5. Remove the two air cleaner cover retaining screws, then the air cleaner cover.
6. Remove the air filter element.
INSTALLATION
1. Install the air filter element.