Ranger 4WD V6-183 3.0L (1993)
1.
Install the new seat belt buckle support bracket (F37Z-13610D11-A) Figure 2, to the seat cushion frame using the M6 Torx head bolt and torque to
8-11 N-m (6-8 lb.ft.). Refer to Figures 3 and 4.
2.
Lubricate the seat track assembly assembly with Multi-Purpose Grease Spray (D7AZ-19584-AA, or equivalent).
3.
Position the slide bar assembly onto the seat track assembly. Refer to Figure 3.
NOTE:
THE SLIDE BAR MUST BE POSITIONED OVER THE STUD OF THE MOUNTING BRACKET ATTACHED TO THE SEAT TRACK
ASSEMBLY.
