Ranger 4WD V6-245 4.0L VIN X SFI (1999)
6. Remove the pads and the stainless steel slippers.
1
Remove the pads.
2
Remove the stainless steel slippers.
7. On 4x2 vehicles, measure the brake disc and hub for minimum thickness.
Replace the brake disc and hub if not within specification.
8. On 4x4 vehicles, measure the brake disc for minimum thickness.
-
Replace the brake disc if not within specifications.
9. If necessary, resurface the brake disc. Ford recommends on-vehicle rotor machining. Follow the lathe manufacturer's instructions.
10. Inspect the disc brake caliper for leaks.
-
If leaks are found, disassembly is required.
Installation
