Ranger 4WD V6-245 4.0L VIN X SFI (1999)
1. NOTE: Clean the anchor plate and stainless steel slipper surfaces.
NOTE: The inboard pad has a wear indicator tab.
Install the stainless steel slippers and the pads.
1
Install the stainless steel slippers.
2
Install the pads.
2. Inspect the anti-rattle spring. Replace if worn or damaged.
3. NOTE: If installing new pads, the caliper pistons must be compressed using a C-clamp and a wooden block.
Rotate the disc brake caliper downward.
4. Install the caliper bolt.
