Ranger 4WD V6-245 4.0L VIN X SFI (1999)
3. NOTE: If brake drums will not come off, follow these steps.
Loosen the brake shoe adjusting screw nut.
1
Using a screwdriver, move the brake shoe adjusting lever off the brake adjuster screw.
2
NOTE: Move the adjustment tool handle downward to loosen the brake shoe adjusting screw nut.
Use the Brake Adjustment Tool to loosen the brake shoe adjusting screw nut.
4. Using the Brake Drum Micrometer, measure the brake drum inside diameter.
-
Replace the brake drum if the maximum inside diameter exceeds the specification molded on the brake drum.
Installation
1. NOTE: If adjusting the rear brakes, refer to Brake Shoe Adjustment.
2. Follow the removal procedure in reverse order.