Ranger 4WD V6-245 4.0L VIN X SFI (1999)
7. Pull back the parking brake cable spring and disconnect the parking brake lever.
Installation
1. Compress the parking brake cable spring and attach the parking brake lever.
2. Clean and lubricate the brake backing plate.
-
Use Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A (Motorcraft WA-10) or an equivalent silicone compound
meeting Ford specification ESE-M1C171-A.
3. Attach the parking brake lever to the rear brake shoe and lining and secure the parking brake lever pin retainer.
