Ranger 4WD V6-245 4.0L VIN X SFI (1999)
6. Install the brake pressure control valve.
7. NOTE: Use clean High-Performance DOT 3 Brake Fluid C6AZ-19542 or equivalent DOT 3 fluid meeting Ford specification ESA-M6C25-A; fill
brake pressure switch.
On cruise control equipped vehicles, install the brake pressure switch.
8. Install the brake master cylinder reservoir.
9. NOTE: Bleed the brake master cylinder prior to installation.
Install the brake master cylinder.
10. Fill the brake master cylinder reservoir and install the brake master cylinder filler cap.
11. Bleed the brake system.
Priming - In-Vehicle or Bench
