Ranger 4WD V6-245 4.0L VIN X SFI (1999)
11. Adjust the spark plug.
INSTALLATION
NOTE:
^
If an original spark plug is reused, make sure it was installed in the same cylinder from which it was taken. New spark plugs can be used in any
cylinder.
^
Apply Silicone Dielectric Compound D7AZ-19A331-A or equivalent meeting Ford specification ESE-M1C~71-A to the inside of the spark plug
wire boots.
1. Install the RH spark plugs.
2. Connect the RH spark plug wires.
3. Install the LH spark plugs.