Ranger 4WD V6-245 4.0L VIN X SFI (1999)
5. Clean and inspect the transmission fluid pan and magnet. Clean all mating surfaces.
6. Flush the transmission fluid cooler and transmission fluid cooler lines.
Installation
1. CAUTION: Lubricate fluid filter O-rings with MERCON V Automatic Transmission Fluid XT-5-QM Meeting Ford specification
MERCON V or they may be damaged.
Lube and install new O-rings onto the transmission fluid filter. Install a new transmission fluid filter.
^
Position transmission fluid filter on the main control valve body.
2. CAUTION: Make sure wire harness is not pinched under filter.
Install transmission fluid filter screw.
3. Position the oil pan magnet in the transmission fluid pan.