Ranger 4WD V6-245 4.0L VIN X SFI (1999)
11. CAUTION: Do not overstretch the retaining spring.
Install the transmission case (16 pin) electrical connector retaining spring.
12. Install the EPC, SSD, and SSB solenoids.
13. CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
Install the solenoid clamp.
1
Position the solenoid clamp on the main control valve body.
2
Install the solenoid clamp screws.