Ranger 4WD V6-245 4.0L VIN X SFI (1999)
14. Connect the TCC, SSD, SSB, and EPC solenoid electrical connectors.
15. CAUTION: Excessive pressure may, break the retaining pins.
Install the wire loom guide and protector.
^
Align the retaining pins to the holes in the solenoid clamps and gently press in the wire loom guide and protector.
16. Install the transmission fluid pan.
1
Install a new transmission fluid pan gasket on the transmission fluid pan.
2
Install and align the transmission fluid pan.
^
Loosely install the transmission fluid pan screws.
17. Using a crisscross sequence, tighten the transmission fluid pan screws.
19. Connect the battery ground cable.
20. Fill transmission to proper fluid level and check for proper transmission operation.
^
Use MERCON V Automatic Transmission Fluid XT-5-QM meeting Ford specification MERCON V.