Ranger 4WD V6-245 4.0L VIN X SFI (1999)
8. Remove the manual control valve detent lever spring.
1
Remove the manual control valve detent lever spring screw.
2
Remove the manual control valve detent lever spring.
9. Remove the low/reverse servo.
1
Remove the low/reverse servo cover screws.
2
Remove the low/reverse band servo cover and gasket. Discard the low/reverse servo separator plate cover gasket.
10. Remove the low/reverse band servo piston and rod.
11. CAUTION: Support the main control valve body.
Do not remove the two (gold) screws specified.
