Ranger 4WD V6-245 4.0L VIN X SFI (1999)
Clutch Master Cylinder: Service and Repair
Bench Bleed Procedure
CAUTION: Brake fluid is harmful to painted or plastic surfaces. If the brake fluid is spilled onto a painted or plastic surface, wash it
immediately with water.
1. Position the clutch master cylinder with the reservoir above the clutch master cylinder and the quick connect fitting below the clutch master
cylinder.
2. Depress the internal mechanism of the male quick connect coupler to open the valve.
3. Stroke and hold the master cylinder push rod.
^
Release the male quick connect coupler valve.
^
Release the master cylinder push rod.
4. Fill the clutch master cylinder reservoir.
^
Repeat step 2 and 3 four times.
