Ranger 4WD V6-245 4.0L VIN X SFI (1999)
3. NOTE: Steps 3 and 4 are an alternate method of performing Steps 1 and 2.
Drive the outer pinion bearing cup into the axle housing using the special tools.
4. Drive the inner pinion bearing cup into the axle housing using the special tools.
5. CAUTION: Whenever the cups are installed new, the pinion bearings must also be installed new.
Make sure the cups are correctly seated in their bores.
^
If a feeler gauge can be inserted between a cup and the bottom of its bore at any point around the cup, the cup is not correctly seated.
