Ranger 4WD V6-3.0L (2008)
-
Tighten to 25 Nm (18 lb-ft).
SuperCab seat
3. Install the inboard rear bolt cover.
All seats
4. Install the inboard front backrest-to-cushion bolt.
-
Tighten to 25 Nm (18 lb-ft).
5. Install the inboard seat backrest latch release cable end and swivel and install the cable anchor.
6. Install the 2 outboard backrest-to-cushion bolts.
-
Tighten to 25 Nm (18 lb-ft).
7. Position the trim cover flap and install the outboard pin-type retainer.