Ranger 4WD V6-3.0L (2008)
All seats
4. Remove the seat track assist spring.
5. Remove the 4 seat track-to-cushion frame bolts and remove the cushion assembly.
6. Remove the seat track adjustment handle.
-
Remove one side of the seat track adjustment handle at a time.
7. Release the cushion trim cover rear J-clip.
8. Remove the 8 rail-to-seat track nuts and separate the seat track rails from the seat track.
Installation
All seats
1. Install the seat track rails to the seat track and install the 8 nuts.
-
Tighten to 25 Nm (18 lb-ft).
