Ranger 4WD V6-3.0L (2008)
Truck Bed: Adjustments
Pickup Bed Alignment
PICKUP BED ALIGNMENT
1. NOTE: The pickup bed bolts are not identical and new bolts must be installed in the same location that they were removed from.
Remove the 6 pickup bed bolts. Discard the bolts.
2. Center the pickup bed on the rear of the pickup cab.
3. Set the gap between the leading edge of the pickup bed and the back of the cab.
4. Tighten the 6 pickup bed bolts.
-
To install, tighten to 63 Nm (46 lb-ft).