Ranger 4WD V6-3.0L (2008)
2. Measure the telescoping gauge with a micrometer. Verify the diameter is within specification.
Connecting Rod Bend
NOTE: Refer to Specifications.
1. Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement
is within specification.
Connecting Rod Twist
NOTE: Refer to Specifications.
1. Measure the connecting rod twist on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the measurement is
within specification.
Connecting Rod Bearing Journal-to-Bearing Clearance
NOTE: Refer to Specifications.
NOTE: The crankshaft connecting rod journals must be within specifications to check the connecting rod bearing journal clearance.
1. Remove the connecting rod bearing cap.