Ranger 4WD V6-3.0L (2008)
Air Register: Service and Repair
Register - Driver Side
REGISTER - DRIVER SIDE
Removal and Installation
1. Remove the audio unit.
2. Remove the center instrument panel finish panel.
1
Remove the 2 screws.
2
Remove the center instrument panel finish panel.
-
Disconnect the electrical connectors.
3. Remove the instrument cluster finish panel.
1
Remove the 5 screws.
2
Remove the instrument cluster finish panel.
-
Disconnect the electrical connectors.
4. Remove the LH instrument panel register.
1
Remove the 3 screws.
2
Remove the driver side register.
5. To install, reverse the removal procedure.
