Ranger 4WD V6-3.0L (2008)
Peanut Fitting
When disconnecting or connecting peanut fittings, observe the following.
-
The male and female blocks of the peanut fitting are retained with a nut.
-
Support the female fitting with a wrench to prevent twisting of the tubes.
-
An O-ring seal is installed around the tube on the male block.
-
When correctly assembled, the male and female fittings should be flush.
-
Use only the O-ring seal listed in the Ford Master Parts Catalog.
Tube-O Fitting
Tube-O Fitting
When disconnecting or connecting tube-O fittings, observe the following.
-
The male and female portions of the fitting are retained with a nut.
-
Support the female fitting with a wrench to prevent twisting of the tubes when disconnecting.
-
An O-ring seal is installed around the tube on the male side of the fitting.
-
Use only the O-ring seal listed in the Ford Master Parts Catalog.
