Ranger 4WD V6-3.0L (2008)
Vehicles with speed control
8. Disconnect the speed control actuator electrical connector.
9. Remove the speed control actuator bolt and position the actuator aside.
-
Detach the speed control cable from the evaporator core housing.
All vehicles
10. Disconnect the blower motor electrical connector.
11. Disconnect the blower motor resistor electrical connector.
12. Release the 2 heater hose clamps and disconnect the heater hoses from the heater core.
13. Detach the pin-type retainer and position the windshield washer hose aside.
14. Disconnect and detach the heater control valve vacuum hose.
