Ranger 4WD V6-3.0L (2008)
Part 2
Removal and Installation
1. Detach the EGR valve vacuum connector.
2. Detach the exhaust manifold-to-EGR valve tube fitting.
-
To install, tighten to 50 Nm (37 lb-ft).
3. Remove the bolts, the EGR valve and the gasket.
-
Discard the gasket.
-
To install, tighten to 25 Nm (18 lb-ft).
4. NOTE: The EGR valve sealing surfaces are soft metals.
To install, reverse the removal procedure.
-
Carefully clean the EGR valve sealing surfaces.
-
Install a new EGR valve gasket.