Ranger 4WD V6-3.0L (2008)
Ignition Cable: Service and Repair
SPARK PLUG WIRES
Exploded View
Special Tool(s)
Special Tool(s)
Removal and Installation
CAUTION: Spark plug wires must be connected correctly. Failure to follow this instruction may result in poor engine performance.
1. CAUTION: Do not pull on the spark plug wire as it may separate from the spark plug wire connector inside the spark plug wire boot.
Use the Spark Plug Wire Remover to grasp and twist the spark plug wire boot back and forth on the spark plug insulator to release the connectors.
