Ranger 4WD V6-3.0L (2008)
4. Remove the special tool.
5. Install the torsion bar cover plate and 4 retaining bolts.
^
Tighten to 55 Nm (41 lb-ft).
6. Adjust the ride height.
7. Check and if necessary, align the front end.
4. Remove the special tool.
5. Install the torsion bar cover plate and 4 retaining bolts.
^
Tighten to 55 Nm (41 lb-ft).
6. Adjust the ride height.
7. Check and if necessary, align the front end.