Ranger 4WD V6-3.0L (2008)
Shift Solenoid: Testing and Inspection
Pinpoint Tests - OSC Equipped Vehicle
Anytime an electrical connector or solenoid body is disconnected, inspect the connector for terminal condition, corrosion and contamination. Also
inspect the connector seal for damage. Clean, repair or install a new connector as required.
Shift Solenoid Pre-Diagnosis
Use the following shift solenoid operation information while carrying out Pinpoint Test A.
Solenoid Operation Chart
Solenoid Operation Chart
Shift Solenoid Failure Mode Chart "Always On"
Failed OFF due to PCM and/or vehicle wiring concerns, solenoid electrically, mechanically or hydraulically stuck ON.
