Ranger 4WD V6-3.0L (2008)
Pilot Bearing: Service and Repair
Pilot Bearing
Removal
1. Using the special tool, remove the transmission input shaft pilot bearing.
2. Inspect the transmission input shaft pilot bearing for:
^
misalignment and looseness in the flywheel.
^
needle rollers for scoring, worn or broken needle rollers, inadequate grease or discoloration.
^
seal leakage.
Installation
1. NOTE: The transmission input shaft pilot bearing can only be installed with the seal facing the transmission. The transmission input shaft pilot
bearing is pregreased and does not require additional lubrication. A new transmission input shaft pilot bearing must be installed whenever it is
removed.
Using a soft-face hammer and the special tool, install the transmission input shaft pilot bearing.