Ranger 4WD V6-3.0L (2008)
6. Index-mark the driveshaft flange and pinion flange for correct alignment during installation.
7. Remove the 4 driveshaft flange bolts.
8. CAUTION: The driveshaft centering socket yoke fits tightly on the pinion flange pilot. Never hammer on the driveshaft or any of its
components to disconnect the driveshaft centering socket yoke from the pinion flange. Pry only in the area shown with a suitable tool to
disconnect the driveshaft centering socket yoke from the pinion flange or damage to the component may occur.
Using a suitable tool as shown, disconnect the driveshaft centering socket yoke from the pinion flange.
^
Using mechanic's wire, position the driveshaft aside.
